A straight comparison to help you pick the right operation type for your shop, godown, or industrial opening.
| Factor | Manual | Gear | Motorized |
|---|---|---|---|
| Best opening size | Up to 8 m² | Up to 35 m² | Up to 50 m² |
| Daily effort | High | Low-medium | None (remote/button) |
| Extra cost | — | +₹9,500 | +₹20,000–40,000 |
| Power cut | Not affected | Not affected | Manual override needed |
| Best for | Small shops | Mid-size shops/godowns | Showrooms, large godowns |
Bigger openings need more force to lift — past a certain size, manual operation becomes impractical daily.
A shutter opened/closed 10+ times a day benefits far more from motorization than one opened once daily.
Manual is the most economical. Motorized has the highest upfront cost but saves daily effort long-term.
In areas with frequent power cuts, gear operation is often a safer middle ground — no dependency on electricity at all.
In most cases yes, though it depends on the existing structure — a site visit confirms feasibility.
Gear systems are generally quieter than fully manual operation and require less physical force.
As an engineer-owned workshop, motor and gear sizing is calculated based on your exact opening — not a one-size-fits-all recommendation.